Interfacing a Transducer to an Analog-to-Digital Converter
Order ID:89JHGSJE83839 Style:APA/MLA/Harvard/Chicago Pages:5-10 Instructions:
Interfacing a Transducer to an Analog-to-Digital Converter and Interfacing Digital-to-Analog Converters to Loads
The purpose of this lab is to allow students to gain experience constructing Digital to Analog Converters in Multisim. Students will extend the concepts learned in the module and homework to build an 8-Bit DAC. Several binary inputs and the associated analog output values measured with a virtual digital multimeter will be captured in screenshots.
- Watch the video Week 5 – Op Amp DAC Circuit
- Determine the values of all the remaining seven resistors and fill in the table 1.
Table1:
Resistors Values R1 1k Ω R2 R3 R4 R5 R6 R7 R8
- Recall the binary to decimal conversion and fill the table below:
Bits Binary Input Decimal conversion MSB (S1)
1000 0000 S2 S3 S4 S5 S6 S7 LSB (S8)
0000 0001
- Construct an 8-bit binary weighted DAC in Multisim and measure the output voltage Vout using the multimeter and record the computed gain below.
Table2:
Bits Binary Input Vin Rn (n = 1,2,3,4,5,6,7,8)
RF Output Voltage (Vout) Voltage Gain (Av) MSB (S1)
1000 0000 S2 S3 S4 S5 S6 S7 LSB (S8)
0000 0001
- Take the screenshots of Vout measurements for the input/output combination for each of the above 8-bits.
- Answer the following questions:
- Determine the approximate value of RF which results in accurate digital to analog conversion.
- Write the expression for Vout in terms of Vin, RF and R for each bit. Also, express Vout in terms of all 8 input voltages.
- Starting from the least significant bit to the most significant bit, what is the effect of feedback resistance on the output voltage?
- From your measurements, does increase in the digital value result in increase in analog value? Please explain.
- Is the voltage gain of the op Amp different for each bit? Please explain why?
- Create a new word document called “Lab5_StudentID.docx” with your GID substituted into the file name.
- Verify all calculations from analysis and measurements from simulations. Save the results along with the table and paste the screen captures in the word document. Make sure to answer the questions.
- Upload file “Lab5_StudentID” in Blackboard.
RUBRIC
Excellent Quality
95-100%
Introduction 45-41 points
The background and significance of the problem and a clear statement of the research purpose is provided. The search history is mentioned.
Literature Support
91-84 points
The background and significance of the problem and a clear statement of the research purpose is provided. The search history is mentioned.
Methodology
58-53 points
Content is well-organized with headings for each slide and bulleted lists to group related material as needed. Use of font, color, graphics, effects, etc. to enhance readability and presentation content is excellent. Length requirements of 10 slides/pages or less is met.
Average Score
50-85%
40-38 points
More depth/detail for the background and significance is needed, or the research detail is not clear. No search history information is provided.
83-76 points
Review of relevant theoretical literature is evident, but there is little integration of studies into concepts related to problem. Review is partially focused and organized. Supporting and opposing research are included. Summary of information presented is included. Conclusion may not contain a biblical integration.
52-49 points
Content is somewhat organized, but no structure is apparent. The use of font, color, graphics, effects, etc. is occasionally detracting to the presentation content. Length requirements may not be met.
Poor Quality
0-45%
37-1 points
The background and/or significance are missing. No search history information is provided.
75-1 points
Review of relevant theoretical literature is evident, but there is no integration of studies into concepts related to problem. Review is partially focused and organized. Supporting and opposing research are not included in the summary of information presented. Conclusion does not contain a biblical integration.
48-1 points
There is no clear or logical organizational structure. No logical sequence is apparent. The use of font, color, graphics, effects etc. is often detracting to the presentation content. Length requirements may not be met
You Can Also Place the Order at www.collegepaper.us/orders/ordernow or www.crucialessay.com/orders/ordernow Interfacing a Transducer to an Analog-to-Digital Converter