Evaluation of Frequently Encountered Issues Assignment
Order ID:89JHGSJE83839 Style:APA/MLA/Harvard/Chicago Pages:5-10 Instructions:
Evaluation of Frequently Encountered Issues Assignment
Frequently Encountered Issues
Midterm paper: Frequently Encountered Issues
I have been able to review a few papers that some of you sent to me for feedback and have come up with a list of frequently encountered issues. If you found out you ran into one or more of these issues in the evaluation part, don’t worry because you’re probably not the only one who made a mistake (s). So, with multiple people running into the same issues, I’m writing this list to clarify and hopefully help you out before your final submission.
First, table 1 is created to help you organize your paper. It has the factor to be evaluated, evaluations and benchmarks columns. This table can be in the result section and you can organize your paper according to it. It is optional, so do not panic!
Table 1: EHR evaluation table
FACTORS TO EVALUATE EVALUATIONS & BENCHMARKS Description Reference Phase I Evaluation Phase I Benchmark Phase II Evaluation Phase II Benchmark Factor The game should be physically safe to play. Yeweifale, 2021 Systematically find every possible controller that could be used to input data into the game and test it with the game and with respect to in-game tips. No (0) incompatible third party controller is found, or tips or software are modified to make third party controllers compatible. Post-consumer reports of mishandled third party controllers must be systematically evaluated Post-consumer reports of mishandled third party controllers should be at or below a rate of 0.1% of the number of game copies sold Factor Factor Factor Issues 1: Factors listed in Evaluation part/ Listed factors are not detailed enough
I encouraged all of you to put the factors in a table, so you can make sure that you specify them properly. Multiple factors I reviewed had factors accidentally listed in the (especially Phase I). These all also had the problem that a factor wasn’t detailed. A factor should be what you want to analyze, and the evaluation is how you want to analyze it. Basically, the how and the what should be specified and detailed enough.
Examples (these aren’t from your options because I can’t give away answers):
Let assume that you include a table with all the requirements that you are going to discuss in this assignment:
Table 2: Issue related to the factors listed in the evaluation part/ listed factors are not detailed enough
Factor (What) … Phase I Evaluation (How) Phase I Benchmark Phase II Evaluation (How) Phase II Benchmark Correct Patient portal systems need to be usable … An accepted systems usability scale is used to test the portal system with 5 patients The average usability score is 75% (Same as Phase I) The average usability score is 90% INCORRECT Usability … Patient portal systems need to be usable An accepted systems usability scale is used to test the portal system with 5 patients, average usability score is 75% Patient portal systems need to be usable An accepted systems usability scale is used to test the portal system with 5 patients, average usability score is 90%
Issue 2: Phase I benchmarks are counterproductive
I also found that some misunderstood what the Phase I benchmarks should be like. If a Phase I benchmark has a Phase II benchmark for the same evaluation, Phase I should be less strict. Some misinterpreted this as that the Phase I benchmark being lenient to the point that something bad was being expected.
Examples:
Table 3: Issue related to the phase I benchmarks are counterproductive
Factor … Phase I Evaluation Phase I Benchmark Phase II Evaluation Phase II Benchmark Correct Physician critical care dashboards need to be legible … Physicians are tested for % accuracy in reading all items on the dashboard On average, the % accuracy must be at least 90% (Same as Phase I) On average, the % accuracy must be at least 98% INCORRECT Physician critical care dashboards need to be legible … Physicians are tested for % accuracy in reading all the items on the dashboard On average, the % accuracy must be less than 98% (Same as Phase I) On average, the % accuracy must be at least 98%
Issue 3: Evaluations not related to benchmarks
This issue often stemmed from factors being placed in the what to evaluate. However, it also came when the evaluation was placed and written correctly. All benchmarks are results of evaluations.
This example has a good evaluation, but the benchmark doesn’t directly relate to it. While record switching can cause patient mortality, finding the number of critical incidents due to switched records won’t give us a mortality figure to compare to a benchmark.
Table 4: Issue related to the evaluations not related to benchmarks
Factor … Phase I Evaluation Phase I Benchmark … … Correct Patient record switching is a major safety issue … The number of critical incidents due to switched records is analyzed The number of critical incidents is below 1 per 10,000 patient-visits … … INCORRECT Patient record switching is a major safety issue … The number of critical incidents due to switched records is analyzed The patient mortality is less than 1 per 10,000 patient-visits … …
Issue 4: Factor and evaluations not related
This type of problem is similar to the last one. One cause was, again, a factor sitting in the evaluation column. The other times, the evaluation made sense but for some reason didn’t match the factor.
Example (with a valid albeit irrelevant evaluation):
Table 5: Issue related to the factor and evaluations with no relation
Factor … Phase I Evaluation … … … Correct Systems need to schedule staff so that they have enough downtime between tasks … Staff are surveyed to determine the number of times they weren’t given enough time to go from one place to another … … … INCORRECT Systems need to schedule staff so that they have enough downtime between tasks … The system logs are checked daily to find out the rate of staff who are absent from work. … … …
Issue 5: Remedial measure stated where the evaluation (or benchmark) should be
In a few places, as an evaluation or benchmark, a remedial measure (how to fix the problem) was stated instead.
Example: Evaluation is a remedial measure
Table 6: Issue related to the remedial measure stated where the evaluation (or benchmark) should be
Factor … Phase I Evaluation Phase I Benchmark Phase II Evaluation Phase II Benchmark Correct Physician critical care dashboards need to be legible … Physicians are tested for % accuracy in reading all items on the dashboard On average, the % accuracy must be at least 90% Physicians are tested for % accuracy in reading all items on the dashboard On average, the % accuracy must be at least 98% INCORRECT Physician critical care dashboards need to be legible … Physicians are tested for % accuracy in reading all the items on the dashboard On average, the % accuracy must be at least 90% Physicians are given additional training in dashboard literacy On average, the % accuracy must be at least 98%
Important Note: You are welcome to add remedial measures, and they will help prove you went above and beyond the call for the assignment. However, do not place these under evaluations or benchmarks on your table and don’t refer to them as evaluations or benchmarks in your paper. Instead, if you wish, make an additional evaluation table column to the right of each benchmark and enter the remedial measure/ or intervention measure, and in your paper, discuss them after the respective benchmarks.
Evaluation of Frequently Encountered Issues Assignment
RUBRIC
Excellent Quality
95-100%
Introduction 45-41 points
The background and significance of the problem and a clear statement of the research purpose is provided. The search history is mentioned.
Literature Support
91-84 points
The background and significance of the problem and a clear statement of the research purpose is provided. The search history is mentioned.
Methodology
58-53 points
Content is well-organized with headings for each slide and bulleted lists to group related material as needed. Use of font, color, graphics, effects, etc. to enhance readability and presentation content is excellent. Length requirements of 10 slides/pages or less is met.
Average Score
50-85%
40-38 points
More depth/detail for the background and significance is needed, or the research detail is not clear. No search history information is provided.
83-76 points
Review of relevant theoretical literature is evident, but there is little integration of studies into concepts related to problem. Review is partially focused and organized. Supporting and opposing research are included. Summary of information presented is included. Conclusion may not contain a biblical integration.
52-49 points
Content is somewhat organized, but no structure is apparent. The use of font, color, graphics, effects, etc. is occasionally detracting to the presentation content. Length requirements may not be met.
Poor Quality
0-45%
37-1 points
The background and/or significance are missing. No search history information is provided.
75-1 points
Review of relevant theoretical literature is evident, but there is no integration of studies into concepts related to problem. Review is partially focused and organized. Supporting and opposing research are not included in the summary of information presented. Conclusion does not contain a biblical integration.
48-1 points
There is no clear or logical organizational structure. No logical sequence is apparent. The use of font, color, graphics, effects etc. is often detracting to the presentation content. Length requirements may not be met
You Can Also Place the Order at www.collegepaper.us/orders/ordernow or www.crucialessay.com/orders/ordernow Evaluation of Frequently Encountered Issues Assignment